The output reactor is installed between the motor and theinverter output line to compensate for long-term distribution capacitance, toeffectively inhibit the pulse load of motor drive the IGBT and parasitic lossesof shielded cable, and reduce the adverse effect to cable insulation and motor.
021-51087080
The output reactor is installed between the motor and theinverter output line to compensate for long-term distribution capacitance, toeffectively inhibit the pulse load of motor drive the IGBT and parasitic lossesof shielded cable, and reduce the adverse effect to cable insulation andmotor.reduce the moise and eddy current losses, and to increase the effectivetransmission distance of the inverter, reduce interference on other equipmentlines, lower motor noise and prolong the working life of motor.
rated operational voltage | 380V/660V/1140V 50Hz/60 Hz |
rated current | 5A to 1600A |
dielectric strength | Core-widing 3000VAC/50Hz/60s no flying fox breakdown |
insulation resistance | Core-winding 1000VDC，insulation resistance≥ 100MΩ |
Reactor noise | Less than 65dB（With reactor horizontal distance point 1 meter test ） |
overload capacity | 1.5 times In 1 minute， 2 times In 10 second |
saturation characteristics | 1.5 times inductance, no less than 80% of original inductance |
INGRESS PROTECTION | IP00（equipment cabinet optional） |
insulation grade | F or H optional |
Producet performance standards | IEC289:1987 power reactor GB10229-88 reactor（eqv IEC289:1987) |
